We Represent " Rocol Lubricant " Maintenance Products       ASSEMBLY & DRY FILM LUBRICANT     Provide either a totally or almost dry thin MoS2 (moly) film of exceptionally high load carrying strength for application in areas where conventional lubricants fail or are inappropriate. Typically these products are used to prevent galling and pick up on assembly, to avoid contamination of a finished product or to lubricate in very arduous conditions.   DRY MOLY SPRAY Aerosol applied thin, dry film of resin bonded MoS2 (moly) which withstands high loads and temperatures. Does not pick up dirt and dust. Use as a dry film lubricant on slides, gears, plain bearings, as an anti-seize on precision threaded components and in applications where contamination of finished components cannot be tolerated. Temperature range up to +4500C. Part Code Unit Size TDS MSDS         10025 Aerosol                           DRY MOLY PASTE A soft paste with high MoS2 (moly) content which can be rubbed or burnished on to the surface to give a dry bonded film with high load carrying capacity. Use for dry film lubrication where product contamination cannot be tolerated and as a lubricant or anti seize agent on precision threads. Temperature range up to +4500C.   Part Code Unit Size TDS MSDS         10040 100g 10046 750g 10047 18kg                                   DRY MOLY FLUID A resin bonded, dry film coating of molybdenum disulphide. Developed to lubricant sliding mechanisms such as plain bearings, pins, cams and slides where a wet lubricant cannot be tolerated. Temperature range up to +4500C. Part Code Unit Size TDS MSDS         10205 5L                   MT-LM ASSEMBLY AND RUNNING-IN PASTE A soft, greasy paste with a high content of giving a thin lubricating film which resists high loads and prevents seizure and galling. Use during the assembly of interference fits, also acts as an anti-seize to facilitate dismantling and adjustment. Temperature range up to +4500C. Part Code Unit Size TDS MSDS         10050 100g 10056 750g 10057 18kg   OXYLUBE SPRAY An aerosol applied, thin lubricating film of MoS22 (moly) which is bonded with an inorganic agent. Use particularly in oxugen or vacuum environments or where components may be affected by chemicals, solvents or petroleum based products. Temperature range up to +4500C. Part Code Unit Size TDS MSDS         10125 Aerosol                         Top  |  Back