|
When speaking about lubricants, one always
thinks of oils, but in reality there are
many applications where non liquid
lubricants are used; among the most
well-known of these products are the
greases.
A grease is composed of a thickener and a
lubricating oil; the thickener is used to
holding the oil which, conversely, takes
care of lubricating. Actually, the thickener
can be seen as a “sponge” which holds the
oil inside itself, letting it out only in
certain circumstances which are those in
which the lubrication is really needed.
The properties of grease is therefore
connected to the nature and type of
thickener and to that of the employed
lubricant.
It is possible to have thickeners with soap
bases (calcium, lithium, sodium, etc.),
complex soaps (calcium, lithium,
litho-calcium, aluminium, etc.) or other
types (bentone, polyurea, etc.);
analogously, mineral, semi-synthetics or
synthetics oils can be dispersed in the
thickener.
Also from a productive point of view,
greases are more complex than oils in that
it is not enough to mix individual
components, but it is necessary to implement
a sufficiently delicate productive process
which also involves chemical reactions
between the different components employed.
The choice of the right grease is difficult
and must be done with the aid of an adeguate
technical support because there are many
parameters which can influence the
efficiency of the products and machinery
lubricated with grease.
Agip is one of the main grease manufacturer
and it has a vast and articulate range able
to satisfy the needs of both the industrial
and automotive fields.
On this page, information about only a few
of our lubricants can be found; for
information about other products or for more
details, it is possible to refer to Eni’s
R&M Division commercial structure in your
geographic area. |
|
Available Products |
Full Data Sheet |
|
GREASE MU SERIES (NLGI 0 - 3)
Lithium-base, medium-fibre
"multipurpose" greases, suitable
for a very wide range of uses. |
 |
[107K] |
|
GREASE MU EP SERIES (NLGI 0 - 3)
Lithium-base greases containing
EP (Extreme Pressure) additives. |
|
[107K] |
|
GREASE SM 2
grey-black, smooth-textured,
lithium-base grease containing
molybdenum disulphide. |
|
[111K] |
|
GREASE SLL 00
Synthetic base, wide temperature
range, having good pumpability
even at low temperature. |
|
[107K] |
|
GREASE 30
medium-fibre, lithium-base,
multipurpose grease. |
|
[95K] |
|
GREASE NF 1 & 2
non-melting grease formulated
from a special thickener in a
form of a gelling substance
suitable for the lubrication
where high temperature high
speed is required. |
|
[90K] |
|
SAGUS 60
dark-grey graphite grease, can
be dispensed by brush or by
spray. |
|
[95K] |
|
SP GREASE LC SERIES
for high temperature and extreme
pressure applications with a
very high dropping point and
high stability |
|
[54K] |
|
GREASE
LP SERIES
Calcium-based greases containing
EP additives and having very
good water-washout properties. |
|
[97K] |
|
MP GREASE
lithium-base grease containing
EP with highly water-resistant
property. |
|
[113K] |
|
GREASE CC SERIES
calcium-base greases which
resist washout even by hot
water. |
|
[92K] |
|
GREASE 15 / 16
fibrous calcium-base greases for
vehicle chassis lubrication |
|
[92K] |
|
GREASE 33 FD
non-melting grease formulated
from a special thickener in the
form of a gelling substance, for
lubrication of hub bearings on
wheels with disc brakes. |
|
[94K] |
|
